How To Clean A Rug – Free Cleaning Tips & Guides 2022

Area rugs warm up floors and inject color and pattern into a space that highlights your living room. But along with area rugs often come stains and debris, so it’s important to know how to clean a rug. Unlike cloths, flags, or any other fabric products with a small size and easy to wash, an area rug is so much bigger and heavier, but cleaning it is easier than you think and you can do it with just a few simple cleaning supplies. But what’s the right way to do it?
Let Geembi help you to find out exactly how to clean a rug correctly and make your stunning rugs look new again!

Area rugs create zones and highlight a specific zone in your home’s living quarters.

Different fibers require different cleaning techniques:

The first step of how to clean a rug is to identify the right material your rug is made from. This is important because different materials require unique area rug cleaning methods and tools. Different fibers require different types of cleaning solutions. For the most part, you can clean cotton, synthetic, wool, and natural fiber rugs yourself, but always check the rug’s tag for cleaning instructions before you begin. This will help you to prolong area rug life while cleaning your rug.
Area rug cleaning is a project you can easily take on yourself. There’s no need to hire professional rug cleaners for the task – unless your rug is extremely delicate (for example, an antique rug, Persian rug, or oriental rug).

Different rugs come with different fabric texture

Basic tools to clean a rug:

Here’s a basic standard pack of what you’ll need to have on hand to complete a successful cleaning for almost every type of rug:
– Rug shampoo (or mild dish soap).
– Soft-bristle brush or sponge.
– Rubber gloves.
– Garden hose.
– Wet-dry vacuum.
With just a few simple tools like that, we will be able to clean many different kinds of rugs. Let get move on to find out how to clean a rug which is the best cleaning way for your rug.

Basic tools to clean area rugs

How To Clean A Rug In 5 Steps:

SHAKE YOUR RUG AND REMOVE THE DUST:

Before cleaning your rug, you need to make sure every last bit of debris is gone. If you have pets, use the brush attachment to get any lingering stray hairs.
– Firmly hold the corners of the rug while you powerfully shake it. Keep shaking until dirt and debris stop coming from the rug.
– If your rug is too big to shake by yourself, hang it over a railing, fence, or clothesline. Then whack it with a strong stick. Hit both sides of the rug to ensure all dirt is removed.
Tip: Don’t whack too hard, but give the rug a few firms knocks to see if dust comes out. If they do, keep whacking.

VACUUM IT BEFORE CLEANING:

Carpets in high-traffic areas should be vacuumed multiple times a week. Vacuum your rug frequently to keep dirt from staining the rug fibers. Vacuum both sides of the rug every few weeks to help loosen dirt and debris. If you don’t know how to clean a rug with a vacuum, just disable to beater bar on your vacuum and vacuum it with suction only.

Vacuum the rugs before deep wash

Always vacuum both sides to keep the backing in good condition you don’t need to pull up and flip the entire rug, just fold half onto itself, vacuum the backing, then repeat with the other half.

DO THE COLOR TEST AND WASH THE RUG:

Before you deep clean an area rug, always test the rug for colorfastness. Test a small corner of the rug just in case your cleaning method causes any noticeable damage. If it passes the test, follow the step-by-step guide to learn how to clean a rug effectively.
Using a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Let the cleaner sit on the rug for five minutes before you start rinsing.
With a safe shampoo chosen, pull out the garden hose and give your rug a good rinse.
Tip: Don’t worry about getting it too wet, you need to prepare it well for the shampoo application. Using a sturdy brush with a stout handle, work the shampoo deep into the carpet fiber.
Next, rinse the soap out of the rug using a garden hose or buckets of clean water. Make sure all the cleaning solution is completely removed from the area rug and the runoff water is crystal clear.

Cleaning polyester rug

REMOVE EXCESS WATER AND LET THE RUG DRY:

At this point, you’ll want to get rid of as much excess water in the rug as you can so it will dry faster. You can use a wet-dry vacuum if you have one, or use a squeegee in the direction of the nap.
The next-to-last step is simply letting it dry. Lay the rug flat and allow the top of the rug to dry completely. Then, flip it over to let the bottom side dry. Make sure the rug is fully dry before you return it to the room. Fans can help speed up the process.
Note: Drying may take longer than a day – or even the weekend.
For more protected drying, consider moving the rug to the laundry room or garage.
When the rug is fully dry, you won’t be able to feel any water even when you squeeze hard, and it will probably be a bit stiff.

Dry the rug and you are all done cleaning steps

VACUUM OR BRUSH OUT THE RUG:

Put the area rug back in its place, and then give it one last vacuuming.
Note: The carpet fibers will probably be flattened and odd-looking after washing. A thorough vacuuming is like combing your rug to restore its proper appearance.
During the cleaning process, threads and fibers can get compacted and squished. Revive them by running a vacuum over the now-dry rug, or brush them with a soft-bristled brush.
When you’re finished, you can enjoy your freshly cleaned carpet.

Hope these simple steps-by-steps guides & tips help you to know how to clean a rug clearly, and you can complete the job whenever you like.

We also have other great products at Geembi, please feel free to have a look and pick your trending products.


Related Posts